Tag Archives: adhesive mounted snow guards

B

You Forgot To Order Snow Guards!!!! – Is It too late!?!??

Last time we chatted, you were sitting on your nice deck enjoying the colors of early fall with a pumpkin spice beer in your hand. (I am still judging you for that flavor choice by the way) Now your panicking because you dozed off for a moment and woke to find it is December 1st! In place of a refreshing chill in the air, you now have icicles forming on your nose. When did this happen? How did this happen? Wasn’t it just August a week ago?! Snap back to reality for a moment and answer me this….did you ever order those snow guards your other half asked you to get? Oh boy…you’re in trouble now. That’s a nice doghouse over there…it looks like it just might fit you and Rover.

I’m just kidding. All hope is not lost and you still have some options for protecting your roof and gutters this winter. You had better work quickly, though, because those clouds in the sky are getting dark. Unfortunately, it is too late this year to install one of our individual polycarbonate guards on your roof with liquid adhesive. That requires approximately 28 days at 50 degrees or above and you haven’t seen 50 degrees in about a week.  If you have a mechanically fastened roof panel, however, with exposed roofing screws, you can install one of either our polycarbonate or stainless steel guards with mechanical fasteners. Your first step should be to visit www.SpacingTool.com to get a FREE layout. Just make sure that you are sealing the guards properly to prevent roof leaks.

Untitled

Now, if you have a standing seam metal roof, you DO NOT want to attach guards to your roof with penetrating mechanical fasteners. These panels are specifically designed to float on your roof and interlock with each other by utilizing a series of hidden fasteners and clips. Screwing anything into a standing seam metal roof will cause potential for major damage due to the way the panels flex during expansion and contraction. For these roofing types, you have 2 choices.

IMG_1963

The first of these two choices is our SnowBreaker3M product. The SnowBreaker3M is a clear polycarbonate guard that can be installed with the use of 3M double sided tape. This particular guard works as a cutter or snow-breaker to slowly break up snow and ice on your roof, allowing it to shed safely and gently. Because this guard is not supporting weight in the way that a normal snow guard would, it can be installed with double sided tape to great effect. This option will not hold the snow and ice on your roof, but it will greatly decrease the potential damage and danger of your roofs snow load. The double sided tape does not require a curing period like our Surebond SB-190 adhesive, so it is a great solution for the procrastinator in us all. You can get a FREE layout for this product at www.SpacingTool.com as well.

bar

Option #2 will actually work with almost any kind of roofing, including standing seam. I’m, of course, talking about our SnoBar, ColorBar, and ColorRail systems. These fence-type snow retention systems can be attached to your roof in various ways and any time of the year. For standing seam metal roofs, they will use a non-penetrating clamp-on system. For corrugated or other exposed fastener roofs, these systems use a screw down attachment method with brackets that support the bars above the roof surface. While the unit pricing for these systems is a bit higher, the amount of rows needed is normally much lower, which will drastically reduce the amount of labor needed for installation. We have various styles and finishes that can match any color of roofing. To begin the ordering process, you want to visit the following link and fill out the form with your project’s information.

http://snoblox.com/index.php?l=page_view&p=snobar

Once your request is received, our specialists will begin designing and quoting a system that is perfect for you and in-line with your budget and taste.

See now…you aren’t too late to make this happen. Maybe you won’t have to spend the night with the dog after all. Let’s be honest…she would have let him stay in the house anyhow. Hurry up and get onto www.Snojax.com right away! It is time to order snow guards. Consider it the gift of safety for yourself and your family this Holiday!

Share Button
fascinating-home-kid-friendly-backyard-design-with-kids-playground-featuring-swing-sets-and-green-slider-also-kids-tiny-home-with-climbing-play-surrounded-by-green-grass-field-ideas-backyard-landscapi

3 Ways to Avoid Roof Damage from Snow and Ice

It is a sunny afternoon in July, and you are sitting on your freshly stained deck, looking around at your perfectly manicured lawn and sipping on a delicious adult beverage. You’ve just finished a weekend of planting expensive ornamental shrubs and your kids are playing on a brand new swing set. You got a couple of blisters from that one, but as you look around…you are the king of your castle. You are finished with your outdoor chores and ready to relax and take it all in. Little do you know, however, that potential danger lurks above. No…I’m not talking about that pigeon on the telephone line or the sun that already has you burnt to a nice shade of crimson (your wife warned you to wear sunscreen). No sir, I’m talking about your roof.

Yes, that beautiful new roof that cost as much as that new boat you are now waiting until next year to buy. The one that all of your neighbors compliment you on while you retrieve the morning paper! It’s new, it’s shiny, it’s modern….and in a few short months it could be a bigger headache than your oldest daughter’s boyfriend Greg. (We don’t like him either!) I hate to remind you, but as much as you are trying to ignore it…winter is only 5 months away. That hefty investment, on your home, can have serious negative consequences if you don’t act now. Yes you can finish your beer, but then we need to talk about 3 ways to help prevent snow and ice damage.

First thing’s first. Vent pipes. You have several and they are going to be damaged by snow and ice unless you purchase protection for them. We would recommend the VentSaver product. Available in a 3 sizes and able to be mounted to either standard agricultural panels or standing seam roofs (with the use of the Standing Seam Plate) these products will help divert snow and ice around your vents or chimney with ease, saving you from costly repairs and structure-damaging roof leaks.  They also provide the benefit of additional structural support.

Next on the agenda are snow guards. These often overlooked products can be used to either keep snow and ice on your roof until it melts or can allow the snow and ice to shed, but in smaller and less dangerous pieces. There is a variety on the market and your first step, before purchasing, should be to do some research. Different roofing styles and finishes can greatly impact the types of guards that will be necessary for your roof and also their proper layout. Make sure that you receive a layout from the manufacturer. Don’t get sucked into an argument with that contractor “who’s been in the business for 30 years and knows what they are doing”. The manufacturer’s warranty will often, if not always, be based on their own recommended layout.

The third preventative measure that you should take actually has a major impact on your roof right now. While you guzzle down that growler from your local brewery, your gutters are filling up with debris from trees, wind, and that pigeon we told you about earlier.  Clogged gutters can cause multiple issues for your home including, but limited to: foundation damage from moisture collection, damage to fascia boards, and damage to those plants your wife made you plant, that you might just be allergic to. Issues like these only get much worse in the winter. Ice dams can form pools of water and allow it to seep into your walls and overflowing water/ice can land on walkways below causing a safety hazard. A simple solution for this problem is the use of a leaf guard system. We suggest our Leafblox product. Simple and fast installation of this product will allow water from rain and/or melting snow and ice to drain easily while repelling debris.

Look, we get it, you had a long day and deserve a break. After you tuck the little ones in and make sure the oldest didn’t sneak out of her bedroom window, settle in for the night and hop back onto www.Snojax.com to place your order. Use www.coupon.SpacingTool.com for a free layout and 5% off of your snow guard purchase. You’d rather be installing protection in shorts and a tank top than fixing roof leaks in a snow suit.

Share Button

Hiring A Contractor To Install Your Snow Guards

1

The snow is finally melting away and the flowers are beginning to bloom. That means one thing…roof and gutter repairs!!! While the majority of our snow guards can be installed by just about any DIY-er, sometimes the job is better left to a skilled professional. Typically, contacting a roofer is the next step. Finding the right roofer, however, can be a challenging and confusing task. Below is a list of helpful tips to assist you in choosing the right roofing contractor and getting the best service for your money.

Insurance is a must

Make sure that your contractor has worker’s compensation and liability insurance. Ask to see the certificates and actually call the insurance carrier to confirm that they are valid.

This keeps all bids on a level playing field, knowing that part of the cost of the roof and the service being provided to you is protected with the security of coverage.

Choose a local contractor

Make sure that the company that you choose is local. This means that they are not just operating locally now, but have an established business and reputation in the community.

Customer’s, all too often, get into situations where they need a repair or other warranty work, only to find that the company they hired to install their roof closed, moved or vanished. It is very easy to provide a piece of paper, but the warranty is only as good as the longevity and reputation of the company.

Price isn’t everything

Never choose a company based on price. Cheap bids drive down the market and anyone with overhead and proper insurance has to establish pricing to cover such costs.

Those that do work on the side or are just working out of a pick-up truck can always do the work cheaper. But in the long run, you get what you pay for. Customers that are sold on price, as their sole criteria, ultimately end up spending more money to fix problems, and many of these problems would have been covered under a workmanship guarantee by a reputable established roofing company.

Avoid storm chasers

Steer clear of the knock-on-the-door, “We were in your neighborhood” roofers. This is just canvassing and selling. Pick a roofer from a referral or a sign in your area that has a satisfied client on the other end.

If you are approached by this technique, call your agent and ask for a recommendation. The majority of these roofers will tell you that you have storm damage and have you sign a letter of intent. Don’t be pressured by forceful tactics. You never have to sign an intent letter. Wait to see the contracts and take your time in reviewing.

Get job details in writing

We suggest that you don’t give funds until the work is complete. Make sure that you are satisfied with the result and that the terms of payment were discussed prior to the job and adhered to by both parties.

Make sure that you ask how long a job will take. You need to have a clear idea of what size of crew they will have and a completion day.

Communication is paramount

Did they return your calls? Did they send the documentation that you asked them to send? Did they follow through? If you answered “no” to any of these questions, then make sure you communicate your concerns to the company representative.

If they still can’t make good on their promises, walk away. Communication is key to every business. If you aren’t getting what you need on the front end when they are trying to get your business, what will happen once you have committed the work to them?

Spring is the perfect time to begin thinking about purchasing and installing snow guards on your roof. Do it while it is fresh in your mind. Take a look at your roof and gutters, then remind yourself that you do not want to pay for damage ever again. Decide if you are able to install yourself of if you need to hire a contractor. If an installer is needed, follow the steps laid out above and you will be on your way to a pleasant non-stressful experience.

 

Sielfleisch, Chris. “6 Tips for Choosing a Roofing Contractor.” Angie’s List. Angie’s List, 08 Jan. 2016. Web. 30 Mar. 2017.

 

Share Button

Sealing Snow Guards And Winter Ice Expansion

1As we near the end of winter, it is not too late to start thinking about snow guards. Actually, this is the perfect time to start planning for installation in the Spring. This is especially true for our customers who are choosing to install their guards with our Surebond SB-190 adhesive. This installation method requires approximately 28 days at 50 degrees (Fahrenheit) or above to reach a full cure.  Whether installing snow guards with adhesive or mechanically with screws and sealant, there is one major rule that must be followed. The sealant or adhesive MUST cover the entire base of the guard to create a full seal. Cutting corners during this step can lead to costly repairs and major headaches.

Winter weather brings many forms of precipitation, each with its own set of issues.  These can lead to guard failures or leaks, if a proper seal is not achieved. Most liquids have a simple behavior when they are cooled (at a fixed pressure): they shrink. Water is one of the few exceptions to this behavior. When liquid water is cooled, it contracts like one would expect until a temperature of approximately 4 degrees Celsius (39.2 degrees Fahrenheit) is reached. After that, it expands slightly until it reaches the freezing point, and then when it freezes it expands by approximately 9%. The constant cycle of melting and re-freezing on metal roofs can cause water to seep into the cracks and air-pockets between a snow guard and your roof. The pressure of rushing rain-water can also allow liquid to force itself between the guard and your roof.  The expansion of this frozen water can pry the guard away from the roof, potentially causing guard disengagement from the roof and/or leaks where the screw holes are no longer protected. While this will rarely cause damage to the guard itself, corrosion to the panel and/or warping and rotting of the roof’s wooden structure can become costly repairs once warmer weather reveals winter’s damage.

2When installing snow guards, it is vital to their installation for a proper seal to be created over the entire base by applying a liberal coating or either sealant or adhesive. Once the base is covered, press the guard against your roof with enough pressure for any air-pockets or gaps to be completely filled. This should also result in oozing around the outside edge. A gloved finger can be ran around the outside perimeter of the guard to remove excess and to also complete the guard’s seal. A few extra seconds can make a world of difference when it comes to your snow guard system’s performance. Don’t allow expanding ice to remove your hard work!

Share Button

10 Interesting Snow Related Facts

While you are are shopping for snow guards, here are 10 things you may not know about snow.

1. It Has Snowed as Far South as San Diego and Miami … and Hawaii

The city of San Diego has had numerous reports of snow flurries, accumulating to a trace on two occasions. Los Angeles has recorded accumulating snow on three occasions, including up to 2 inches in 1932.

Brownsville, Texas, recorded 1.5 inches of snow on Christmas Day 2004. This is that city’s only measurable snowfall dating back to 1895.

In 1977, it snowed in Miami and Homestead, Florida, dusting cars and palm trees in tropical Dade County. This was not a measurable amount, and the history books list this snow as a trace. Key West has never seen snow.

You might also be surprised to learn that Hawaii sees snow every year, and even more so, that snow can fall in Hawaii in any month. As you would expect, the snow that falls in Hawaii is confined to its highest elevations, including Mauna Loa and Mauna Kea on the Big Island along with Haleakala on Maui Island.

2. It Can Snow at Temperatures Well Above Freezing

It has snowed at over 40 degrees on numerous occasions, at the surface. Theoretically, according to ScienceBits.com, it can snow up to around 46 degrees.

For snow to occur at temperatures above 40 degrees, the humidity has to be very low, because as snow falls, the flakes evaporate and cool. Evaporation is more efficient when it is dry.

3. Snow Is a Mineral

According to the National Snow & Ice Data Center, snow is a mineral because it is a naturally occurring solid, inorganically formed, and has a definite chemical composition.

4. Snowflakes as Large as Dinner Plates?

Individual snow crystals are small, but sometimes they stick together and create a much larger snowflake.

On rare occasions, snowflakes as large as dinner plates have been observed, according to Kenneth G. Libbrecht, a professor of physics at the California Institute of Technology.

The largest individual snow crystal ever observed by Libbrecht was 0.4 inches from tip to tip.

5. In the Lower 48, Colorado Holds the Record for Most Snow to Fall in a 24-Hour Period

Silver Lake, Colorado, received 75.8 inches of snow in a 24-hour period back in 1921.

Elsewhere in the United States, Alaska received 78 inches in 24 hours at Mile 47 Camp in north-central Alaska in 1963.

6. Not Every Windy Snowstorm Is a Blizzard

According to the National Weather Service, blizzard conditions are met when sustained winds of 35 mph or greater last for three hours or more, and visibility is reduced by falling or blowing snow to less than a quarter-mile frequently for the same period of time.

7. Snow Isn’t Always White

Snow is actually translucent and reflects upward of 90 percent of light that reaches the surface of the snow. Very little light is absorbed in snow, and no particular colors are absorbed more than others. This is the reason snow appears bright white, especially as it is falling.

In fact, naturally accumulating snow can appear blue or even pink. Just like in glaciers, deep snow can attain a deep blue hue as red light gets trapped in deeper pockets of snow. The deeper the snow is, the bluer it can become.

In some higher terrain, snow can be pink due to algae that grows there.

8. Snowflakes Can Be the Same

In 1988, a scientist at the National Center for Atmospheric Research (NCAR) found two identical snow crystals. Similar results have been produced in laboratories. Did we really think that of the infinite amount of snow produced around the world each year, no two flakes are identical? That seems improbable.

9. There Are Many Forms of Snow

When we think about snow, most of us think of the beautiful dendrites. According to snowcrystals.com, there are at least 35 types of snowflakes.

To see some of these types, check out the slideshow below.

10. The Biggest Snowball Fight Was in …

Saskatoon, Canada. More than 7,600 winter warriors came out to throw snow at each other on Jan. 31, 2016.

Contact us today for more information about snow guards and snow retention systems for your roofing project. 

Belles, J. (2016, November 11). 10 Facts About Snow That Might Surprise You. Retrieved January 5, 2017, from https://weather.com/science/weather-explainers/news/ten-facts-about-snow

Share Button

SNOBLOX DEUCE – OUR MOST POPULAR AND MOST VERSATILE SNOW GUARD

untitledFor over 35 years, we have been bringing the best in polycarbonate snow guards for your roof. One of our guards has stood out among its peers to become our most popular guard that we sell to this day. The American made SnoBlox Deuce has revolutionized the polycarbonate snow guard industry with its low profile forward mounted 2.5″ high face and its sleek 1.5″ wide waffled tapered back base that fits most roof panels without rib straddling. This patented product has stood the test of time and is an aesthetically appealing, low cost solution to the problem of sliding snow and ice on metal roofing. Its mounting versatility allows it to be both mechanically attached and adhesive mounted on screw down roofs with a 1.5″ flat area. Starter points are provided for mechanical fastening and eliminate the need for pre-drilling when used with a self-tapping #14 screw. This guard is also able to be mounted with adhesive on floating standing seam roof systems, where mechanical mounting is not appropriate. The waffled base provides almost triple the bonding power of a smooth bottom guard in its size category. This guard also has the added benefit of being produced in 11 stock colors along with a recycled finish, known as the Ecoblox. Professional ATI tests demonstrated that the SnoBlox Deuce held 3456 pounds when attached with #14 screws and 1379 pounds when attached with the SB-190 adhesive. All tests were performed simulating realistic snow loading conditions applied to the face of the guard. When installed with adhesive, the best time of year to install these guards is in the late spring through summer. It is important to install with Surebond SB-190 and allow for approximately 28 days at 50 degrees Fahrenheit to achieve the proper cure. Layout assistance can be found on our online calculator at www.SpacingTool.com Because of the Deuce’s almost universal fit potential, this snow guard is preferred both among our wholesalers and also our consistent customers who order in bulk quantities to take advantage of our volume-discounts.
SAM_0027 The Deuce’s 1.5″ base is designed to make it the most universal fit snow guard in the industry.  It is compatible with every metal panel in the industry that allows for a 1.5″ wide flat mounting area.  For this reason and also because it is available in multiple colors, the SnoBlox Deuce makes it our #1 seller. The next time that you are looking for a snow guard for your project, think of the SnoBlox Deuce!

Share Button

OUT OF SIGHT SHOULD NOT BE OUT OF MIND (WINTER IS ONLY 7 MONTHS AWAY)

SAM_0027
Snow guards are about the last thing on any consumer’s mind, now that the warmth of spring is upon us. Winter’s snow and ice are being forgotten as hats, gloves, and boots are being replaced with windbreakers and sandals. This winter, however, was a big one and should be remembered. If you are a home or building owner, this is the most important time of the year for you to begin thinking about and researching snow retention while it is still fresh in your mind.

Many of our customers assume that we are busiest during the winter months, but that simply is not true. This is due, almost entirely, to the fact that many of our products cannot be installed during the winter. Now that the temperature is beginning to rise, we are heading into the perfect time for installation of our polycarbonate guards with adhesive.  Surebond SB-190 is the industry standard for snow guard installation and the one that we trust for use with our products. Its tensile strength, long life expectancy, and ease of application make it the preferred adhesive here at SnoBlox. Warm temperatures, however, are critical for this adhesive to function properly. Surebond SB-190 requires approximately 28 days at 50 degrees (Fahrenheit) or above in order to achieve a proper cure. While temps below 50 degrees will not harm the adhesive or guards, it will extend the curing time.

Some of our competitors attempt to discredit polycarbonate snow guards with horror stories of failures. The part that they won’t tell you is that these failures are almost always attributed to not obtaining or following a manufacturer’s project-specific spacing layout. Every roof is different and the slightest change in pitch, panel length, or ground snow load can have a major impact on the performance of your system. Not every roof can get away with a single row of guards (regardless of the method of installation). Most projects require multiple staggered rows up the slope of the roof. The main purpose of a high quality snow guard is to hold snow and ice in place, allowing it to melt and then drain into your gutters. This field-style layout allows the weight of the snow and ice to be equally distributed over the entire roof’s surface. Snow guards that are only installed along a roof’s eave are often tasked with playing goalie to heavy, high-momentum snow and ice packs. These fast sliding avalanches will often disengage snow guards from the roof and can also cause them to break. This is considered improper installation and often results in higher costs for repairs than what may have been saved by initially cutting corners.

When planning your snow retention system, the first step should be to visit www.SpacingTool.com. This free and user-friendly site will walk you through creating a proper layout for your project. Simple step-by-step instructions make this process quick and painless. Your project specific layout can be completed in a matter of minutes. An email will be sent directly to you with a shopping list and a pictorial diagram showing the proper spacing for your roof. Once you have finished and selected the snow guard that you will be installing, you can then order directly from www.SnoBlox.com or give us a call at 1-800-766-5291 to speak with one of our friendly sales staff.

Your snow guard order will be processed and shipped out same or next day. Installation instructions are included with every shipment along with a coupon code for any additional products that may be needed to finish the job.

man-vacation-people-summer

You want to spend your time enjoying this weather and cooking with that expensive grill…not worrying about it getting crushed this winter by sliding snow and ice. Act now and get back to enjoying your spring!

Share Button

IceBlox Inc. Wins Metal Roofing Magazine’s 2016 Metal of Honor

Metal Of Honor 2016 Half PageWe are proud to announce that IceBlox, Inc. has been awarded the 2016 Metal of Honor from Metal Roofing Magazine for the 7th consecutive year. We are honored to win this prestigious award for our superior snow guards.  Since our company’s inception, we strive to continue the legacy of innovation and quality that Jack McMullen began over 40 years ago. His son Brion McMullen operates our company today, with that same philosophy and drive.

Since the first ever polycarbonate snow guard, the Snojax 1, came off of the assembly line in 1976, we continue to maintain the same level of quality in our products today. All of our products are proudly “Made in the USA” and while that sometimes doesn’t make us the least expensive, it does make us the best!

Our customer service is second to none. Live support is only a phone call away with skilled technicians who will be happy to help you with all of your questions and concerns. Our customized layout program, SpacingTool.com is also available 24/7.  This user-friendly and revolutionary system allows for one-stop shopping and makes the headache of guesswork a thing of the past. Free use and fast calculation allows our customer to get back to the real work at hand. Same or next-day order processing ensures some of the shortest lead times in the business.

We thank Metal Roofing Magazine and their readers for once again awarding our tireless efforts. Whether you are looking for snow guards, vent pipe protection, bar systems or gutter leaf protection, you can count on IceBlox, Inc. to provide you with the best products on the market and the best customer service in the industry.

Share Button

Break Up Dangerous Sliding Snow and Ice With SnowBreaker

 

SnowBreaker-On-Metal-Panel

Winter Storm Jonas recently blanketed the East coast with historic snow levels, rivaling snowstorms of the recent past. Over 14 states received more than a foot of snow. Mount Mitchell, North Carolina took the crown at 66 inches from the storm — a new record for them, beating the 50 inches they measured during the Blizzard of 1993.  At least 6 locations in the East reported their largest record snowfalls ever as well. Allentown PA, BWI, Harrisburg PA, LaGuardia Airport, JFK Airport, and Newark NJ all beat previous records dating as far back as 1888. Storms like this one can be a harsh reminder of just how critical snow retention is for both new and pre-existing buildings.

Typically, our customers are able to solve their roofs’ snow and ice problems with one of our standard snow guard systems. Whether polycarbonate or stainless steel, the majority of the roofs that we sell products for can accommodate a guard system that equally distributes the load of snow and ice over their entire surface. This allows for the snow and ice to melt in place and drain safely from the roof into the buildings’ gutters and downspouts. There are circumstances, however, when our customers may choose to not keep the snow and ice on their roof for an extended period of time. In these cases, a different product is needed to help the snow and ice safely shed from the roof.SAM_0473

IceBlox Inc. has developed the perfect solution for these situations with our revolutionary product called SnowBreaker. As snow and ice shed from a roof, these cost-effective products minimize the danger by slicing the frozen snow and ice into small pieces.  The forward cutting edge and the tucked-back rear support form a triangular shape that acts like a fin to split up the frozen precipitation.  SnowBreaker’s design allows the snow and ice to slowly shed itself from the panel while the guard slices it into safer, smaller pieces before reaching the roof’s edge.  This can be most beneficial in areas where winter weather conditions can sometimes exceed the roof snow load design.

An added benefit for our customers comes from the ability to install this product using 3 different methods of attachment. Those with standing seam roofing, where mechanical attachment is not an option, can install the SnowBreaker using Surebond SB-190 adhesive. (Keep in mind that installation using this method requires 28 days at approximately 50 degrees Fahrenheit to achieve proper curing). Customers with exposed fastener roofing have the choice to use the adhesive method or mechanically with screws. The SnowBreaker’s design includes molded starter points for easy installation using #14 self-tapping fasteners. For customers who do not wish to penetrate their panels, but also cannot meet the temperature requirements for Surebond SB-190, there is still one other method of attachment available.

The SnowBreaker 3M – Peel and Stick, uses pre-attached 3M brand adhesive tape. The cutting edge design reduces significant sheer load so it is an ideal peel and stick solution for year round and/or winter time installation. Customers who purchase the SnowBreaker 3M are provided with adequate sealant for application around the entire perimeter.

The SnowBreaker and SnowBreaker 3M are revolutionizing the industry one building at a time…will yours be next? See our entire line of snow guards here.

Share Button

What Is A Snow Load And How Important Is It?

Proper snow guard layouts are vitally important to ensure a successful installation.  Without a professional layout, customers run the risk of under-designing their system and possible system failure.  Spacingtool.com was created to help architects, homeowners and contractors determine proper guard spacing. Project specific dimensions and local “Ground Snow Loads” are calculated along with the testing strength of the various snow guards to produce a proper layout for snow guards.  This free design service also helps you determine the correct guard recommended for the specific project and panel.

Continue reading

Share Button