Monthly Archives: May 2016

OUT OF SIGHT SHOULD NOT BE OUT OF MIND (WINTER IS ONLY 7 MONTHS AWAY)

SAM_0027
Snow guards are about the last thing on any consumer’s mind, now that the warmth of spring is upon us. Winter’s snow and ice are being forgotten as hats, gloves, and boots are being replaced with windbreakers and sandals. This winter, however, was a big one and should be remembered. If you are a home or building owner, this is the most important time of the year for you to begin thinking about and researching snow retention while it is still fresh in your mind.

Many of our customers assume that we are busiest during the winter months, but that simply is not true. This is due, almost entirely, to the fact that many of our products cannot be installed during the winter. Now that the temperature is beginning to rise, we are heading into the perfect time for installation of our polycarbonate guards with adhesive.  Surebond SB-190 is the industry standard for snow guard installation and the one that we trust for use with our products. Its tensile strength, long life expectancy, and ease of application make it the preferred adhesive here at SnoBlox. Warm temperatures, however, are critical for this adhesive to function properly. Surebond SB-190 requires approximately 28 days at 50 degrees (Fahrenheit) or above in order to achieve a proper cure. While temps below 50 degrees will not harm the adhesive or guards, it will extend the curing time.

Some of our competitors attempt to discredit polycarbonate snow guards with horror stories of failures. The part that they won’t tell you is that these failures are almost always attributed to not obtaining or following a manufacturer’s project-specific spacing layout. Every roof is different and the slightest change in pitch, panel length, or ground snow load can have a major impact on the performance of your system. Not every roof can get away with a single row of guards (regardless of the method of installation). Most projects require multiple staggered rows up the slope of the roof. The main purpose of a high quality snow guard is to hold snow and ice in place, allowing it to melt and then drain into your gutters. This field-style layout allows the weight of the snow and ice to be equally distributed over the entire roof’s surface. Snow guards that are only installed along a roof’s eave are often tasked with playing goalie to heavy, high-momentum snow and ice packs. These fast sliding avalanches will often disengage snow guards from the roof and can also cause them to break. This is considered improper installation and often results in higher costs for repairs than what may have been saved by initially cutting corners.

When planning your snow retention system, the first step should be to visit www.SpacingTool.com. This free and user-friendly site will walk you through creating a proper layout for your project. Simple step-by-step instructions make this process quick and painless. Your project specific layout can be completed in a matter of minutes. An email will be sent directly to you with a shopping list and a pictorial diagram showing the proper spacing for your roof. Once you have finished and selected the snow guard that you will be installing, you can then order directly from www.SnoBlox.com or give us a call at 1-800-766-5291 to speak with one of our friendly sales staff.

Your snow guard order will be processed and shipped out same or next day. Installation instructions are included with every shipment along with a coupon code for any additional products that may be needed to finish the job.

man-vacation-people-summer

You want to spend your time enjoying this weather and cooking with that expensive grill…not worrying about it getting crushed this winter by sliding snow and ice. Act now and get back to enjoying your spring!

Share Button