Guaranteed Shipping Within 24 hrs!
Call Us 866-ICEBLOX
Product Details
12-16 SS VentSaver Mount

$149.00

1+

$149.00

30

1

Overview

The 12-16 SS VentSaver Kit is an add-on product specifically designed to allow the use of the VentSaver Devices on standing seam panels 16" or less.  Our exclusive non-penetrating seam attachment allows the ideal adjustable mounting base for any of the three VentSaver Models.   Patented, universal fit design works on over 500 Standing Seam Panel Profiles!  Fits t-seams, bulb seams, SnapLok, single lok, double lok, MR-24, etc.  List of compatible profiles can be found at the Panel MatrixIf your seams are 12”-16” wide, we recommend the Model 12-16, as offered here, to avoid excessive overhang. Please see Installation Instructions for more information.

The SS VentSaver Kit includes a universal fit Ice Ramp.  The included Ice Ramp and the VentSaver Fin (Sold Separately) work together to protect the base and upper portion of the pipe.  The Ice Ramp is designed to be easily customized to fit your seams. The kit is made in the USA from non-corrosive aluminum and stainless steel components. 

The SSVentSaver kit comes in 2 sizes, the Model 12-16 for panels up to 16" and the Model 12-24 for panels 17" to 24".  

This kit includes:

  • (1) ¼” Adjustable Aluminum Plate – 19” wide
  • (1) 1/8” aluminum Ice Ramp w/ edging strip
  • (4) RCT universal fit standing seam clamps
  • (12) Tek screws – ¼” x 1”  3/8” hex head
  • (12) Set screws for the clamps – 3/16” hex/allen drive
  • (4) 9/16” hex RCT top bolts with stainless washers
  • (1) 3/16” hex bit for set screw tightening

Please note that the VentSaver is not included in this kit and must be purchased separately.

SS VentSaver Installation Instructions

SS VensSaver Spec Sheet

SS VenstSaver Cut Sheet

Reviews

Add Your Review
Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.
Add Your Review

Tell a Friend

(Reload Image)

Overview

The 12-16 SS VentSaver Kit is an add-on product specifically designed to allow the use of the VentSaver Devices on standing seam panels 16" or less.  Our exclusive non-penetrating seam attachment allows the ideal adjustable mounting base for any of the three VentSaver Models.   Patented, universal fit design works on over 500 Standing Seam Panel Profiles!  Fits t-seams, bulb seams, SnapLok, single lok, double lok, MR-24, etc.  List of compatible profiles can be found at the Panel MatrixIf your seams are 12”-16” wide, we recommend the Model 12-16, as offered here, to avoid excessive overhang. Please see Installation Instructions for more information.

The SS VentSaver Kit includes a universal fit Ice Ramp.  The included Ice Ramp and the VentSaver Fin (Sold Separately) work together to protect the base and upper portion of the pipe.  The Ice Ramp is designed to be easily customized to fit your seams. The kit is made in the USA from non-corrosive aluminum and stainless steel components. 

The SSVentSaver kit comes in 2 sizes, the Model 12-16 for panels up to 16" and the Model 12-24 for panels 17" to 24".  

This kit includes:

  • (1) ¼” Adjustable Aluminum Plate – 19” wide
  • (1) 1/8” aluminum Ice Ramp w/ edging strip
  • (4) RCT universal fit standing seam clamps
  • (12) Tek screws – ¼” x 1”  3/8” hex head
  • (12) Set screws for the clamps – 3/16” hex/allen drive
  • (4) 9/16” hex RCT top bolts with stainless washers
  • (1) 3/16” hex bit for set screw tightening

Please note that the VentSaver is not included in this kit and must be purchased separately.

SS VentSaver Installation Instructions

SS VensSaver Spec Sheet

SS VenstSaver Cut Sheet

Reviews

Add Your Review
Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.
Add Your Review

Tell a Friend

(Reload Image)