Tag Archives: installing snow guards


You Forgot To Order Snow Guards!!!! – Is It too late!?!??

Last time we chatted, you were sitting on your nice deck enjoying the colors of early fall with a pumpkin spice beer in your hand. (I am still judging you for that flavor choice by the way) Now your panicking because you dozed off for a moment and woke to find it is December 1st! In place of a refreshing chill in the air, you now have icicles forming on your nose. When did this happen? How did this happen? Wasn’t it just August a week ago?! Snap back to reality for a moment and answer me this….did you ever order those snow guards your other half asked you to get? Oh boy…you’re in trouble now. That’s a nice doghouse over there…it looks like it just might fit you and Rover.

I’m just kidding. All hope is not lost and you still have some options for protecting your roof and gutters this winter. You had better work quickly, though, because those clouds in the sky are getting dark. Unfortunately, it is too late this year to install one of our individual polycarbonate guards on your roof with liquid adhesive. That requires approximately 28 days at 50 degrees or above and you haven’t seen 50 degrees in about a week.  If you have a mechanically fastened roof panel, however, with exposed roofing screws, you can install one of either our polycarbonate or stainless steel guards with mechanical fasteners. Your first step should be to visit www.SpacingTool.com to get a FREE layout. Just make sure that you are sealing the guards properly to prevent roof leaks.


Now, if you have a standing seam metal roof, you DO NOT want to attach guards to your roof with penetrating mechanical fasteners. These panels are specifically designed to float on your roof and interlock with each other by utilizing a series of hidden fasteners and clips. Screwing anything into a standing seam metal roof will cause potential for major damage due to the way the panels flex during expansion and contraction. For these roofing types, you have 2 choices.


The first of these two choices is our SnowBreaker3M product. The SnowBreaker3M is a clear polycarbonate guard that can be installed with the use of 3M double sided tape. This particular guard works as a cutter or snow-breaker to slowly break up snow and ice on your roof, allowing it to shed safely and gently. Because this guard is not supporting weight in the way that a normal snow guard would, it can be installed with double sided tape to great effect. This option will not hold the snow and ice on your roof, but it will greatly decrease the potential damage and danger of your roofs snow load. The double sided tape does not require a curing period like our Surebond SB-190 adhesive, so it is a great solution for the procrastinator in us all. You can get a FREE layout for this product at www.SpacingTool.com as well.


Option #2 will actually work with almost any kind of roofing, including standing seam. I’m, of course, talking about our SnoBar, ColorBar, and ColorRail systems. These fence-type snow retention systems can be attached to your roof in various ways and any time of the year. For standing seam metal roofs, they will use a non-penetrating clamp-on system. For corrugated or other exposed fastener roofs, these systems use a screw down attachment method with brackets that support the bars above the roof surface. While the unit pricing for these systems is a bit higher, the amount of rows needed is normally much lower, which will drastically reduce the amount of labor needed for installation. We have various styles and finishes that can match any color of roofing. To begin the ordering process, you want to visit the following link and fill out the form with your project’s information.


Once your request is received, our specialists will begin designing and quoting a system that is perfect for you and in-line with your budget and taste.

See now…you aren’t too late to make this happen. Maybe you won’t have to spend the night with the dog after all. Let’s be honest…she would have let him stay in the house anyhow. Hurry up and get onto www.Snojax.com right away! It is time to order snow guards. Consider it the gift of safety for yourself and your family this Holiday!

Share Button

SnoBar/ColorBar/ColorRail The Ultimate In Snow Retention

It is officially October. It feels like you were just lounging by the pool a week ago and now the chill in the air has snuck up on you and panic sets in. In your state of summer delight, you forgot to order and install snow guards for the winter. Jack Frost snickers at your revelation from a nearby tree limb that is now covered in leaves that are no longer green, but shades of orange, gold, and brown. Is it too late?…..Will you be able to protect your home from the snow and ice that are looming ever closer?….Will Rocky and Bullwinkle ever finally end Boris and Natasha’s crime spree? Stay tuned!

Ok, but seriously, take a deep breath and pull up a seat. It is not too late for your home, but the time for action is now! Your solution is here! Let me introduce you to SnoBar, ColorBar, and ColorRail. First patented in 1992, these bar systems are the perfect solution for customers in many different climate zones and with many different roofing types. large_26_snobarcolorbracket (2)Whether you have a Standing Seam Metal Roof, Corrugated Panel, Membrane Roof, or Shingled Roof, there is an installation method available to you. You also have some options, so pay attention.


Powder-Coated SnoBar

Snobar is available in 2 different finishes.

  1. Mill Finish – Silver Galvanized silver bar and non-corrosive components.
  2. Powder-Coated – Same non-corrosive components with a professionally applied powder-coat finish for precise color matching.

Mill Finish ColorBar w/ColorStrip

Colorbar is available in 3 different finishes.

  1. Mill Finish – Bright silver, non-corrosive aluminum bar and non-corrosive components.
  2. Mill Finish w/ColorStrip – Our ColorBar accepts a 2” strip of color matched coil for an easy and cost effective colored system.
  3. Powder-Coated aka ColorRail – Same non-corrosive components with a professionally applied powder-coat finish for precise color matching.

Regardless of which system you decide to go with, your first step (after you finish that pumpkin ale) is to visit our website www.SnoBarColorBar.com for more information on our bar systems and the benefits of each system. You can find technical data about the different systems and also results from our third party laboratory testing. Browse the many options we have and then fill out a quote request form. Once one of our technicians receives your information, we will be able to evaluate your project for the right amount of rows necessary to distribute the weight evenly on your roof. Following this recommended layout will qualify you for a lifetime warranty for your system’s parts, performance, and finish. We can then provide a price quote for your project within approximately 24 hours.

Our bar systems are incredibly strong and install fast anytime of the year! Once you place the order, your order will ship to you within 1-2 weeks for a mill system and 3-4 weeks for a powder-coated system. Snoblox-Snojax had been providing the United States and Canada with the best Snow Guards in the industry and our bar systems are consistently the Ultimate In Snow Retention.

Share Button

3 Ways to Avoid Roof Damage from Snow and Ice

It is a sunny afternoon in July, and you are sitting on your freshly stained deck, looking around at your perfectly manicured lawn and sipping on a delicious adult beverage. You’ve just finished a weekend of planting expensive ornamental shrubs and your kids are playing on a brand new swing set. You got a couple of blisters from that one, but as you look around…you are the king of your castle. You are finished with your outdoor chores and ready to relax and take it all in. Little do you know, however, that potential danger lurks above. No…I’m not talking about that pigeon on the telephone line or the sun that already has you burnt to a nice shade of crimson (your wife warned you to wear sunscreen). No sir, I’m talking about your roof.

Yes, that beautiful new roof that cost as much as that new boat you are now waiting until next year to buy. The one that all of your neighbors compliment you on while you retrieve the morning paper! It’s new, it’s shiny, it’s modern….and in a few short months it could be a bigger headache than your oldest daughter’s boyfriend Greg. (We don’t like him either!) I hate to remind you, but as much as you are trying to ignore it…winter is only 5 months away. That hefty investment, on your home, can have serious negative consequences if you don’t act now. Yes you can finish your beer, but then we need to talk about 3 ways to help prevent snow and ice damage.

First thing’s first. Vent pipes. You have several and they are going to be damaged by snow and ice unless you purchase protection for them. We would recommend the VentSaver product. Available in a 3 sizes and able to be mounted to either standard agricultural panels or standing seam roofs (with the use of the Standing Seam Plate) these products will help divert snow and ice around your vents or chimney with ease, saving you from costly repairs and structure-damaging roof leaks.  They also provide the benefit of additional structural support.

Next on the agenda are snow guards. These often overlooked products can be used to either keep snow and ice on your roof until it melts or can allow the snow and ice to shed, but in smaller and less dangerous pieces. There is a variety on the market and your first step, before purchasing, should be to do some research. Different roofing styles and finishes can greatly impact the types of guards that will be necessary for your roof and also their proper layout. Make sure that you receive a layout from the manufacturer. Don’t get sucked into an argument with that contractor “who’s been in the business for 30 years and knows what they are doing”. The manufacturer’s warranty will often, if not always, be based on their own recommended layout.

The third preventative measure that you should take actually has a major impact on your roof right now. While you guzzle down that growler from your local brewery, your gutters are filling up with debris from trees, wind, and that pigeon we told you about earlier.  Clogged gutters can cause multiple issues for your home including, but limited to: foundation damage from moisture collection, damage to fascia boards, and damage to those plants your wife made you plant, that you might just be allergic to. Issues like these only get much worse in the winter. Ice dams can form pools of water and allow it to seep into your walls and overflowing water/ice can land on walkways below causing a safety hazard. A simple solution for this problem is the use of a leaf guard system. We suggest our Leafblox product. Simple and fast installation of this product will allow water from rain and/or melting snow and ice to drain easily while repelling debris.

Look, we get it, you had a long day and deserve a break. After you tuck the little ones in and make sure the oldest didn’t sneak out of her bedroom window, settle in for the night and hop back onto www.Snojax.com to place your order. Use www.coupon.SpacingTool.com for a free layout and 5% off of your snow guard purchase. You’d rather be installing protection in shorts and a tank top than fixing roof leaks in a snow suit.

Share Button

Hiring A Contractor To Install Your Snow Guards


The snow is finally melting away and the flowers are beginning to bloom. That means one thing…roof and gutter repairs!!! While the majority of our snow guards can be installed by just about any DIY-er, sometimes the job is better left to a skilled professional. Typically, contacting a roofer is the next step. Finding the right roofer, however, can be a challenging and confusing task. Below is a list of helpful tips to assist you in choosing the right roofing contractor and getting the best service for your money.

Insurance is a must

Make sure that your contractor has worker’s compensation and liability insurance. Ask to see the certificates and actually call the insurance carrier to confirm that they are valid.

This keeps all bids on a level playing field, knowing that part of the cost of the roof and the service being provided to you is protected with the security of coverage.

Choose a local contractor

Make sure that the company that you choose is local. This means that they are not just operating locally now, but have an established business and reputation in the community.

Customer’s, all too often, get into situations where they need a repair or other warranty work, only to find that the company they hired to install their roof closed, moved or vanished. It is very easy to provide a piece of paper, but the warranty is only as good as the longevity and reputation of the company.

Price isn’t everything

Never choose a company based on price. Cheap bids drive down the market and anyone with overhead and proper insurance has to establish pricing to cover such costs.

Those that do work on the side or are just working out of a pick-up truck can always do the work cheaper. But in the long run, you get what you pay for. Customers that are sold on price, as their sole criteria, ultimately end up spending more money to fix problems, and many of these problems would have been covered under a workmanship guarantee by a reputable established roofing company.

Avoid storm chasers

Steer clear of the knock-on-the-door, “We were in your neighborhood” roofers. This is just canvassing and selling. Pick a roofer from a referral or a sign in your area that has a satisfied client on the other end.

If you are approached by this technique, call your agent and ask for a recommendation. The majority of these roofers will tell you that you have storm damage and have you sign a letter of intent. Don’t be pressured by forceful tactics. You never have to sign an intent letter. Wait to see the contracts and take your time in reviewing.

Get job details in writing

We suggest that you don’t give funds until the work is complete. Make sure that you are satisfied with the result and that the terms of payment were discussed prior to the job and adhered to by both parties.

Make sure that you ask how long a job will take. You need to have a clear idea of what size of crew they will have and a completion day.

Communication is paramount

Did they return your calls? Did they send the documentation that you asked them to send? Did they follow through? If you answered “no” to any of these questions, then make sure you communicate your concerns to the company representative.

If they still can’t make good on their promises, walk away. Communication is key to every business. If you aren’t getting what you need on the front end when they are trying to get your business, what will happen once you have committed the work to them?

Spring is the perfect time to begin thinking about purchasing and installing snow guards on your roof. Do it while it is fresh in your mind. Take a look at your roof and gutters, then remind yourself that you do not want to pay for damage ever again. Decide if you are able to install yourself of if you need to hire a contractor. If an installer is needed, follow the steps laid out above and you will be on your way to a pleasant non-stressful experience.


Sielfleisch, Chris. “6 Tips for Choosing a Roofing Contractor.” Angie’s List. Angie’s List, 08 Jan. 2016. Web. 30 Mar. 2017.


Share Button

Sealing Snow Guards And Winter Ice Expansion

1As we near the end of winter, it is not too late to start thinking about snow guards. Actually, this is the perfect time to start planning for installation in the Spring. This is especially true for our customers who are choosing to install their guards with our Surebond SB-190 adhesive. This installation method requires approximately 28 days at 50 degrees (Fahrenheit) or above to reach a full cure.  Whether installing snow guards with adhesive or mechanically with screws and sealant, there is one major rule that must be followed. The sealant or adhesive MUST cover the entire base of the guard to create a full seal. Cutting corners during this step can lead to costly repairs and major headaches.

Winter weather brings many forms of precipitation, each with its own set of issues.  These can lead to guard failures or leaks, if a proper seal is not achieved. Most liquids have a simple behavior when they are cooled (at a fixed pressure): they shrink. Water is one of the few exceptions to this behavior. When liquid water is cooled, it contracts like one would expect until a temperature of approximately 4 degrees Celsius (39.2 degrees Fahrenheit) is reached. After that, it expands slightly until it reaches the freezing point, and then when it freezes it expands by approximately 9%. The constant cycle of melting and re-freezing on metal roofs can cause water to seep into the cracks and air-pockets between a snow guard and your roof. The pressure of rushing rain-water can also allow liquid to force itself between the guard and your roof.  The expansion of this frozen water can pry the guard away from the roof, potentially causing guard disengagement from the roof and/or leaks where the screw holes are no longer protected. While this will rarely cause damage to the guard itself, corrosion to the panel and/or warping and rotting of the roof’s wooden structure can become costly repairs once warmer weather reveals winter’s damage.

2When installing snow guards, it is vital to their installation for a proper seal to be created over the entire base by applying a liberal coating or either sealant or adhesive. Once the base is covered, press the guard against your roof with enough pressure for any air-pockets or gaps to be completely filled. This should also result in oozing around the outside edge. A gloved finger can be ran around the outside perimeter of the guard to remove excess and to also complete the guard’s seal. A few extra seconds can make a world of difference when it comes to your snow guard system’s performance. Don’t allow expanding ice to remove your hard work!

Share Button

Modern Vent Pipe And Chimney Stack Protection

vs ad

One of our most common complaints from customer is the damage caused by sliding ice and snow that bends and breaks their ventilation pipes. They typically have little protection from being crushed or sheared during an ice and snow slide. Pipe boots are often damaged, leading to roof leaks and costly repair bills.

There are several ways to protect vent-pipes, chimney pipes, and masts from unnecessary damage. We typically recommend installing snow guards in addition to vent protection as a means of damage prevention.

Most snow guards are designed to hold ice and snow in place until it can safely melt off. They are properly installed when installed in multiple rows, spaced evenly up the slope. In the event that a full snow guard system is not required for a particular project, a pointed cutting guard can be used just above the vent-pipes to reduce the chances of damage. This type of installation is commonly referred to as “Isolated Placement” and is not recommended for use with flat faced snow guards. The strategy of an isolated pattern, using a pointed snow guard system, is to spread the pattern in an arrow shape to break ice and snow into smaller pieces helping minimize vent pipe damage. The Snowbreaker from IceBlox, Inc. is a good example of this type of cutting guard. It can be installed 3 ways; glue, mechanical fasteners, or peel and stick.

Some customers choose to install devices known as crickets or saddles. These products are used to divert ice and snow around the upper side of a chimney or vent pipe. Crickets are typically made from metal and may even be covered in the same materials as the roof.

A newer method for combating this problem comes in the form of the VentSaver product by IceBlox, Inc. Ventsaver is available in three different sizes to accommodate different pipe sizes. These devices, often referred to as “cricket eliminators”, help prevent crushed vent-pipes by splitting and diverting the snow while also adding support to the vent-pipes, chimneys or masts. The fin design cuts through packed ice and snow, causing the snow slide to divert around the pipe, and to assist in shedding the ice and snow from the roof. Up until quite recently, these products were only for use with exposed fastener roofing. Now an adapter plate is also available for mounting on most standing seam roofs.

Between late spring and early fall is the best time to plan and install snow retention systems while the weather is good and the roofs are clear. Installation options start to become limited once the temperatures drop and the snow starts falling. Call for more information.



Share Button

Color Matching Snow Guards– What If My Roof Isn’t New?


Many of our customers have the luxury of owning brand new metal roofs. With the hundreds of available roofing manufacturers today, color options are nearly endless. Home and building owners now have more freedom of expression than ever before.  When it comes to matching colors for our Stainless Steel Snow Guards and our Snobar/Colorbar systems, a new roof is ideal. We have access to hundreds of colors, covering the broad spectrum of shades and hues available in today’s roofing market. Most of the time, simply knowing the manufacturer of your new roof is enough information for us to determine a proper match for your snow guard system. Correct matching, in these instances, can be achieved simply by looking at the manufacturer’s color chart and finding a corresponding powder.

There are other times, however, when a customer may decide to install guards on an older roof. If your roof has become faded or discolored, do not lose hope. There are a couple of options that will allow you to ensure the best possible color match for your roof. When dealing with customers with older roofs, we require a physical sample to be mailed to our headquarters in Lemoyne, Pennsylvania. Once the sample arrives, we can match it against our color selection. The best samples are those that are small pieces of the existing roof. Many times these small samples are taken from areas of the roof that are not visually obvious. Other customers will choose to remove a color-matched fastener from the roof and send that in. If neither of these options seems like the right choice for you, there is still one more type of sample that you could provide. A paint swatch from your local hardware store could be the perfect solution for this problem! Paint swatches are free and readily available to anyone! Simply select a couple of cards that closely resemble your roof, then send us the closest match and we will get to work.

We, unfortunately, cannot match your color based on a photograph. Printed photos rely on ink that may not produce an exact match to your roof. This, paired with different camera settings used to take the photos can cause quite a headache for our specialists. Digital photos, provided via email, are also not accepted. No two monitors have the same color settings. Colors can change dramatically when translated digitally. For these reasons, a physical sample is always your best bet.

When choosing snow guards for your roof, custom colors can add an extra bit of style to your roof. We are here to make sure that you get exactly what you are looking for. Don’t let your investment become an eye sore. Contact us today and don’t forget….it’s never too late to teach an old roof new tricks.

Share Button

Snojax I – The Guard That Started It All!


For over 35 years, we have been bringing you the best in polycarbonate snow guards for your roof. However, the Snojax I is the one that started it all! This cornerstone of the non-metallic snow guard industry was invented by Jack McMullen in 1976.

Jack had been a metal building dealer for the construction industry for many years. He had seen the materials and methods that homeowners and contractors were using to retain snow. At the time, people in snow areas fought rooftop avalanches by attaching small upright strips of wood or metal across the lower part of their roofs. While these attachments often worked, they led to other troubles for home and building owners alike. Wood would soften and rot while inexpensive cast metal guards would often lead to ugly stains on rooftops. Jack began researching better materials to improve snow guard performance and reliability. Polycarbonate had just recently become available, a clear, UV stabilized thermoplastic resin that has high impact strength and excellent resistance to extreme heat and cold. After testing and prototyping with this new material, the Snojax I was born.

The Snojax I is the “original” clear snow guard designed to be mechanically fastened through the roof panel into a structural purlin or support below. Because of the unique straddling design, they fit most brands of mechanically fastened 36” panels with three 12” flats of four 9” flats. Molded mounting holes are provided in the base of this guard for mechanical fastening and eliminate the need for pre-drilling when used with a self-tapping #14 screw. Because of the narrow design of the feet, adhesive mounting is not recommended. Professional independent testing demonstrated that the Snojax I holds 1,800 pounds when attached with #14 screws. All tests were performed simulating realistic snow loading conditions applied to the face of the guard.


This patented product has stood the test of time and is an aesthetically appealing, low cost solution to the problem of sliding snow and ice on metal roofing. The Snojax I has been a proven and reliable solution for decades and is still popular with our contractors and DIY homeowners alike. The Snojax I remains a staple among the snow guard industry and is still heralded for its high quality and unique styling. This clear guard is still a top seller even after all of these years. We have the originator, Jack McMullen, to thank for that.

Start your project with a FREE Layout at www.SpacingTool.com.

Share Button


untitledFor over 35 years, we have been bringing the best in polycarbonate snow guards for your roof. One of our guards has stood out among its peers to become our most popular guard that we sell to this day. The American made SnoBlox Deuce has revolutionized the polycarbonate snow guard industry with its low profile forward mounted 2.5″ high face and its sleek 1.5″ wide waffled tapered back base that fits most roof panels without rib straddling. This patented product has stood the test of time and is an aesthetically appealing, low cost solution to the problem of sliding snow and ice on metal roofing. Its mounting versatility allows it to be both mechanically attached and adhesive mounted on screw down roofs with a 1.5″ flat area. Starter points are provided for mechanical fastening and eliminate the need for pre-drilling when used with a self-tapping #14 screw. This guard is also able to be mounted with adhesive on floating standing seam roof systems, where mechanical mounting is not appropriate. The waffled base provides almost triple the bonding power of a smooth bottom guard in its size category. This guard also has the added benefit of being produced in 11 stock colors along with a recycled finish, known as the Ecoblox. Professional ATI tests demonstrated that the SnoBlox Deuce held 3456 pounds when attached with #14 screws and 1379 pounds when attached with the SB-190 adhesive. All tests were performed simulating realistic snow loading conditions applied to the face of the guard. When installed with adhesive, the best time of year to install these guards is in the late spring through summer. It is important to install with Surebond SB-190 and allow for approximately 28 days at 50 degrees Fahrenheit to achieve the proper cure. Layout assistance can be found on our online calculator at www.SpacingTool.com Because of the Deuce’s almost universal fit potential, this snow guard is preferred both among our wholesalers and also our consistent customers who order in bulk quantities to take advantage of our volume-discounts.
SAM_0027 The Deuce’s 1.5″ base is designed to make it the most universal fit snow guard in the industry.  It is compatible with every metal panel in the industry that allows for a 1.5″ wide flat mounting area.  For this reason and also because it is available in multiple colors, the SnoBlox Deuce makes it our #1 seller. The next time that you are looking for a snow guard for your project, think of the SnoBlox Deuce!

Share Button


Snow guards are about the last thing on any consumer’s mind, now that the warmth of spring is upon us. Winter’s snow and ice are being forgotten as hats, gloves, and boots are being replaced with windbreakers and sandals. This winter, however, was a big one and should be remembered. If you are a home or building owner, this is the most important time of the year for you to begin thinking about and researching snow retention while it is still fresh in your mind.

Many of our customers assume that we are busiest during the winter months, but that simply is not true. This is due, almost entirely, to the fact that many of our products cannot be installed during the winter. Now that the temperature is beginning to rise, we are heading into the perfect time for installation of our polycarbonate guards with adhesive.  Surebond SB-190 is the industry standard for snow guard installation and the one that we trust for use with our products. Its tensile strength, long life expectancy, and ease of application make it the preferred adhesive here at SnoBlox. Warm temperatures, however, are critical for this adhesive to function properly. Surebond SB-190 requires approximately 28 days at 50 degrees (Fahrenheit) or above in order to achieve a proper cure. While temps below 50 degrees will not harm the adhesive or guards, it will extend the curing time.

Some of our competitors attempt to discredit polycarbonate snow guards with horror stories of failures. The part that they won’t tell you is that these failures are almost always attributed to not obtaining or following a manufacturer’s project-specific spacing layout. Every roof is different and the slightest change in pitch, panel length, or ground snow load can have a major impact on the performance of your system. Not every roof can get away with a single row of guards (regardless of the method of installation). Most projects require multiple staggered rows up the slope of the roof. The main purpose of a high quality snow guard is to hold snow and ice in place, allowing it to melt and then drain into your gutters. This field-style layout allows the weight of the snow and ice to be equally distributed over the entire roof’s surface. Snow guards that are only installed along a roof’s eave are often tasked with playing goalie to heavy, high-momentum snow and ice packs. These fast sliding avalanches will often disengage snow guards from the roof and can also cause them to break. This is considered improper installation and often results in higher costs for repairs than what may have been saved by initially cutting corners.

When planning your snow retention system, the first step should be to visit www.SpacingTool.com. This free and user-friendly site will walk you through creating a proper layout for your project. Simple step-by-step instructions make this process quick and painless. Your project specific layout can be completed in a matter of minutes. An email will be sent directly to you with a shopping list and a pictorial diagram showing the proper spacing for your roof. Once you have finished and selected the snow guard that you will be installing, you can then order directly from www.SnoBlox.com or give us a call at 1-800-766-5291 to speak with one of our friendly sales staff.

Your snow guard order will be processed and shipped out same or next day. Installation instructions are included with every shipment along with a coupon code for any additional products that may be needed to finish the job.


You want to spend your time enjoying this weather and cooking with that expensive grill…not worrying about it getting crushed this winter by sliding snow and ice. Act now and get back to enjoying your spring!

Share Button