Monthly Archives: January 2016

Break Up Dangerous Sliding Snow and Ice With SnowBreaker

 

SnowBreaker-On-Metal-Panel

Winter Storm Jonas recently blanketed the East coast with historic snow levels, rivaling snowstorms of the recent past. Over 14 states received more than a foot of snow. Mount Mitchell, North Carolina took the crown at 66 inches from the storm — a new record for them, beating the 50 inches they measured during the Blizzard of 1993.  At least 6 locations in the East reported their largest record snowfalls ever as well. Allentown PA, BWI, Harrisburg PA, LaGuardia Airport, JFK Airport, and Newark NJ all beat previous records dating as far back as 1888. Storms like this one can be a harsh reminder of just how critical snow retention is for both new and pre-existing buildings.

Typically, our customers are able to solve their roofs’ snow and ice problems with one of our standard snow guard systems. Whether polycarbonate or stainless steel, the majority of the roofs that we sell products for can accommodate a guard system that equally distributes the load of snow and ice over their entire surface. This allows for the snow and ice to melt in place and drain safely from the roof into the buildings’ gutters and downspouts. There are circumstances, however, when our customers may choose to not keep the snow and ice on their roof for an extended period of time. In these cases, a different product is needed to help the snow and ice safely shed from the roof.SAM_0473

IceBlox Inc. has developed the perfect solution for these situations with our revolutionary product called SnowBreaker. As snow and ice shed from a roof, these cost-effective products minimize the danger by slicing the frozen snow and ice into small pieces.  The forward cutting edge and the tucked-back rear support form a triangular shape that acts like a fin to split up the frozen precipitation.  SnowBreaker’s design allows the snow and ice to slowly shed itself from the panel while the guard slices it into safer, smaller pieces before reaching the roof’s edge.  This can be most beneficial in areas where winter weather conditions can sometimes exceed the roof snow load design.

An added benefit for our customers comes from the ability to install this product using 3 different methods of attachment. Those with standing seam roofing, where mechanical attachment is not an option, can install the SnowBreaker using Surebond SB-190 adhesive. (Keep in mind that installation using this method requires 28 days at approximately 50 degrees Fahrenheit to achieve proper curing). Customers with exposed fastener roofing have the choice to use the adhesive method or mechanically with screws. The SnowBreaker’s design includes molded starter points for easy installation using #14 self-tapping fasteners. For customers who do not wish to penetrate their panels, but also cannot meet the temperature requirements for Surebond SB-190, there is still one other method of attachment available.

The SnowBreaker 3M – Peel and Stick, uses pre-attached 3M brand adhesive tape. The cutting edge design reduces significant sheer load so it is an ideal peel and stick solution for year round and/or winter time installation. Customers who purchase the SnowBreaker 3M are provided with adequate sealant for application around the entire perimeter.

The SnowBreaker and SnowBreaker 3M are revolutionizing the industry one building at a time…will yours be next? See our entire line of snow guards here.

Share Button